You are now visiting the Philips lighting website. A localized version is available for you.
Suggestions
    • CoreLine Recessed Spot gen2 – for every project, where light really matters

      RS155Z MODULE LED6-WB-/840 D68 PSR
      RS155Z MODULE LED6-WB-/840 D68 PSR
      CoreLine Recessed Spot gen2

      RS155Z MODULE LED6-WB-/840 D68 PSR

    Specifications Show all

    Operating and Electrical
    Connection
    Push-in connector 3-pole
    Average CLO power consumption
    - W
    Power Consumption
    7.2 W
    Initial CLO power consumption
    - W
    Inrush time
    0.02 ms
    Cable
    Cable 0.25 m with connector 3-pole
    Inrush current
    2 A
    Number of products on MCB of 16 A type B
    40
    Line Frequency
    50 or 60 Hz
    Power Factor (Fraction)
    0.9
    Input Voltage
    220 to 240 V
    Input Frequency
    50 or 60 Hz
    Product Data
    Order code
    94108399
    Full product name
    RS155Z MODULE LED6-WB-/840 D68 PSR
    Numerator - Packs per outer box
    18
    Numerator - Quantity Per Pack
    1
    Full product code
    871951494108399
    Material number (12NC)
    911401823484
    EAN/UPC - Case
    8719514941472
    Order product name
    RS155Z MODULE LED6-WB-/840 D68 PSR
    Over Time Performance (IEC Compliant)
    Lumen maintenance at median useful life* 75000 h
    -
    Lumen maintenance at median useful life* 50000 h
    70
    Lumen maintenance at median useful life* 35000 h
    -
    Lumen maintenance at median useful life* 100000 h
    -
    Control gear failure rate at median useful life 50000 h
    5 %
    Approval and Application
    Flammability mark
    For mounting on normally flammable surfaces
    Protection class IEC
    Safety class II
    Warranty period
    5 years
    Ingress protection code
    IP20/54  [Finger-protected; dust accumulation-protected, splash-proof]
    Photobiological risk specification
    0.2 m
    Photobiological risk
    Photobiological risk group 1 @200mm to EN62778
    EU RoHS compliant
    Yes
    Mech. impact protection code
    IK02  [0.2 J standard]
    ENEC mark
    ENEC mark
    Glow-wire test
    Temperature 650 °C, duration 30 s
    Controls and Dimming
    Driver/power unit/transformer
    Power supply unit (ON/OFF)
    Control interface
    depends on driver (1-10V, DALI…)
    Constant light output
    No
    Dimmable
    Yes
    General Information
    Number of gear units
    1 unit
    Light source replaceable
    Yes
    Driver included
    Yes
    Value ladder
    Performance
    Mechanical and Housing
    Fixation material
    Steel
    Optic material
    Polycarbonate
    Reflector material
    -
    Optical cover/lens material
    Polycarbonate
    Housing Material
    Aluminum die-cast
    Housing Color
    Black
    Optical cover/lens finish
    Textured
    Overall diameter
    58 mm
    Overall height
    62 mm
    Initial Performance (IEC Compliant)
    Initial chromaticity
    (0.38, 0.38) SDCM <5
    Luminous flux tolerance
    +/-10%
    Power consumption tolerance
    +/-10%
    Application Conditions
    Suitable for random switching
    No
    Maximum dim level
    10% (depends on dimmer, ELV)
    Performance ambient temperature Tq
    25 °C
    Temperature
    Ambient temperature range
    0 to +35 °C
    Light Technical
    Correlated Color Temperature (Nom)
    4000 K
    Light source color
    840 neutral white
    Unified glare rating CEN
    30
    Luminous Efficacy (rated) (Nom)
    110 lm/W
    Optic type
    Beam angle 36°
    Stroboscopic effect value (SVM)
    0.4
    Saturated Red (R9)
    <50
    Luminous Flux
    800 lumen
    Luminaire light beam spread
    36°
    Color rendering index (CRI)
    >80
    Beam angle of light source
    120 degree(s)
    Flickering value (PstLM)
    1
    Installation Diagrams
     black
    black
    Downloads
    Product Data Sheet
    Visuals
    Brochures

    Recently Viewed

    • Add product
       
    • Add product
       
    • Add product
       
    Add product