4 FlowStar Large Products found

Browse the FlowStar Large products and find the product that you are looking for by using the filter and compare options

Product

Efficacy

Lamp Luminous Flux

Color temperature

IES

Leaflet

Product family information

Tunnel operators are looking for an LED solution for both interior and entrance lighting that delivers cost, safety and availability benefits over the full lifetime of the product. FlowStar’s stainless-steel modular build and dedicated LED design provide a long-lasting and efficient LED alternative to conventional HPS lighting. FlowStar can also be combined with our controls and services for the highest levels of performance.

Benefits

High lumen output; dedicated tunnel luminaire that can replace HPS entrance lighting

Long-lasting, highly efficient lighting solution for the whole tunnel

Easy to install and maintain

Features

A lifetime solution for both tunnel entrance and interior lighting in combination with service packages

Designed for maintenance (modular build and glass cover)

Can be integrated with controls (e.g. TunneLogic) and services for best system performance

True point-for-point LED alternative to HPS up to 400 W

For entrance lighting, it can be combined with the FlowLine linear interior luminaire

Can compete on Total Cost of Ownership with current HPS solutions within the TotalTunnel approach

Applications

Traffic tunnels and underpasses

Downloads

Product Data Sheet

Family Data Sheet Localized commercial leaflet PDF 566.8 kB
Install instructions 583443000020804 F-583 FlowStar MI PDF 4.8 MB
EcoDesign document FlowStar Ecodesign document PDF 1.7 MB

Visuals

Product family details

General

Type	BGB300 (ENTRANCE version) BGB310 (INTERIOR version)
Light source	Integral LED-module
System power	BGB300: 79 up to 435 W BGB310: 68 up to 370 W
Luminous flux	BGB300: 9,200 up to 50,000 lm BGB310: 8,200 up to 44,000 lm
Luminaire efficacy	> 100 lm/W
Correlated Color Temperature	4000 K (neutral white, NW) 5700 K (cool white, CW)
Color Rendering Index	> 70
Maintenance of lumen output - L80F10	> 100,000 hours at 25 ºC
Operating temperature range	-25 to +40 ºC
Driver	Separate (non-self ballasted LED-module)
Mains voltage	220-240 V / 50-60 Hz
Dimming	DALI or SDU dimmable
Optic	Tunnel asymmetrical (DTA) Tunnel counter-beam (DTCB) Tunnel symmetrical (DTS) Tunnel asymmetrical wide beam (DTA-WB) Tunnel symmetrical wide beam (DTS-WB)
Optical cover	Tempered glass, hard
Material	Housing: stainless steel Heatsink: aluminum Cover: glass, thermally toughened
Color	Not painted stainless steel and anodized aluminum
Connection	Plugs connections or flying lead
Maintenance	Long lasting sealed units easy and fast to exchange
Installation	Ceiling mounted 6 flange mounting clamps included for fast installation and allignment in the horizontal plane Option for plugs connection for plug and play installation Recommended mounting height: > 4 m
Cable gland	Flying lead versions: M20 Plug and play version: 2 receptacles for DALI (in and out) and 1 receptacle for power in
Remarks	Separate FlowStar LED units are available (BGB300 and BGB310 with dedicated designations) Separate FlowStar driver units are available (EGB300 and EGB310 with dedicated designations) Separate mounting clamp sets (set of 4 and set of 6 pcs) are available For the versions equiped with connection sockets, cables with matching plugs are available

Cannot find what you’re looking for?
Perhaps one of these links might help

Tools & Software

Distributor or partner finder

Support

Questions about our systems, services or products?

Find our partners

We love your feedback

Tell us what you think of our website