You are now visiting the Philips lighting website. A localized version is available for you.
Suggestions
    • TownGuide Performer – Designed around your needs

      BDP101 LED60/830 II DS PCF SI CLO-DDF2 6
      LED
      BDP101 LED60/830 II DS PCF SI CLO-DDF2 6

      BDP101 LED60/830 II DS PCF SI CLO-DDF2 6

      Order code: 90614800

      Full Product Code: 871829190614800

    Specifications Show all

    General Information
    Number of light sources
    8  [ 8 pcs]
    Lamp family code
    LED60  [ LED module 6000 lm]
    Light source colour
    830 warm white
    Light source replaceable
    Yes
    Number of gear units
    1 unit
    Driver/power unit/transformer
    PSDD-CLO  [ Power supply unit with DynaDimmer and constant light output (integrated)]
    Driver included
    Yes
    Optical cover/lens type
    PCF  [ Polycarbonate bowl/cover frosted]
    Luminaire light beam spread
    75°
    Embedded control
    CLO-DDF2  [ Constant light output and DynaDimmer fixed presets version 2]
    Control interface
    -
    Light regulation
    Dimming via DynaDimmer integrated in ballast or driver
    Connection
    Screw connection block 5-pole
    Cable
    -
    Protection class IEC
    Safety class II (II)
    Parts colour
    All parts colored
    Coating
    -
    Glow-wire test
    650/5  [ Temperature 650 °C, duration 5 s]
    Flammability mark
    NO  [ -]
    Safety device
    PCBC  [ PCB cover]
    CE mark
    CE mark
    ENEC mark
    ENEC mark
    Warranty period
    5 years
    Optic type outdoor
    Distribution symmetrical
    Photocell
    No  [ -]
    Constant light output
    Yes
    Number of products on MCB (16 A type B)
    10
    EU RoHS compliant
    Yes
    WEEE mark
    -
    LED engine type
    LED
    Serviceability class
    Class A, the luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge-protection device, optics, front cover and mechanical parts
    Product family code
    BDP101  [ TOWNGUIDE PERF BOWL]
    Light Technical
    Upward light output ratio
    15
    Standard tilt angle post-top
    Standard tilt angle side entry
    -
    Operating and Electrical
    Input Voltage
    220-240 V
    Input frequency
    50 to 60 Hz
    Initial CLO power consumption
    37 W
    Average CLO power consumption
    38.5 W
    End CLO power consumption
    40 W
    Inrush current
    45 A
    Inrush time
    0.285 ms
    Power factor (min.)
    0.95
    Power factor (nom.)
    0.88
    Controls and Dimming
    Dimmable
    Yes
    Mechanical and Housing
    Housing material
    Aluminum
    Reflector material
    -
    Optic material
    Acrylate
    Optical cover/lens material
    Polycarbonate
    Fixation material
    Steel
    Mounting device
    62P  [ Post-top for diameter 62 mm]
    Optical cover/lens shape
    Hemispherical
    Optical cover/lens finish
    Frosted
    Torque
    15
    Overall height
    293 mm
    Overall diameter
    570 mm
    Effective projected area
    0.095 m²
    Colour
    Silver
    Dimensions (height x width x depth)
    293 x NaN x NaN mm (11.5 x NaN x NaN in)
    Approval and Application
    Ingress protection code
    IP66  [ Dust penetration-protected, jet-proof]
    Mech. impact protection code
    IK10  [ 20 J vandal-resistant]
    Surge protection (common/differential)
    Luminaire surge protection level up to 6 kV differential mode and 6 kV common mode
    Initial Performance (IEC Compliant)
    Initial luminous flux
    2300 lm
    Luminous flux tolerance
    +/-7%
    Initial LED luminaire efficacy
    62 lm/W
    Init. Corr. Colour Temperature
    3000 K
    Init. Colour rendering index
    80
    Initial chromaticity
    (0.43, 0.40) SDCM <5
    Initial input power
    40 W
    Power consumption tolerance
    +/-11%
    Over Time Performance (IEC Compliant)
    Control gear failure rate at median useful life 100,000 h
    10 %
    Lumen maintenance at median useful life* 100,000 h
    94
    Application Conditions
    Ambient temperature range
    -40 to +35 °C
    Performance ambient temperature Tq
    25 °C
    Maximum dimming level
    50%
    Product Data
    Full product code
    871829190614800
    Order product name
    BDP101 LED60/830 II DS PCF SI CLO-DDF2 6
    EAN/UPC – product
    8718291906148
    Order code
    90614800
    Numerator – quantity per pack
    1
    SAP numerator – packs per outer box
    1
    Material no. (12 NC)
    910500991015
    SAP net weight (piece)
    6.830 kg
    Installation Diagrams
    BDP101 - LED GreenLine 6000 lm - Symetrický rozptyl - Mléčný polykarbonátový kryt
    BDP101 - LED GreenLine 6000 lm - Symetrický rozptyl - Mléčný polykarbonátový kryt
    Downloads
    Product Data Sheet
    Visuals
    Brochures

    Recently Viewed

    • Add product
       
    • Add product
       
    • Add product
       
    Add product