You are now visiting the Philips lighting website. A localized version is available for you.
    • Dimming – a next step in energy saving

      HF-Ri TD 2 26-42 PL-T/C E+
      HF-Ri TD 2 26-42 PL-T/C E+
      HF-Regulator Intelligent Touch DALI for PL-T/C and TL5C

      HF-Ri TD 2 26-42 PL-T/C E+

      Order code: 24169000

      Full product code: 871829124169000

    Specifications Show all

    General information
    Application code
    Type version
    Lamp type
    Number of lamps
    2 piece/unit
    Number of products on MCB (16 A type B) (nom.)
    Automatic restart
    Operating and electrical
    Input Voltage
    195-240 V
    Input frequency
    50 to 60 Hz
    Ignition method
    Warm Start
    Crest factor (max.)
    Power factor 100% load (nom.)
    Ignition time (max.)
    1 s
    Mains voltage performance (AC)
    Mains voltage safety (AC)
    Earth leakage current (max.)
    0.5 mA
    Inrush current width
    0.35 ms
    Standby power consumption (max.)
    0.27 W
    Ballast factor (nom.)
    Power losses (nom.)
    2.7 W
    Inrush current peak (max.)
    45 A
    Efficiency at full load [%]
    90.88 %
    Connector type input terminals
    WAGO 250 series
    Cable capacity output wires mutual (max.)
    150 pF
    Connector type output terminals
    WAGO 250 series
    Connector type control input terminals
    WAGO 250 series
    Wire strip length
    8.0-9.0 mm
    Dual fixture master/slave
    Yes  [ Master/Slave operation possible]
    Control input terminal cross section
    0.50-1.50 mm²
    Input terminal cross section
    0.50-1.50 mm²
    Output terminal cross section
    0.50-1.50 mm²
    Auto-insert (ALF/ADS) wire cross section
    0.50-1.50 mm²
    Cable capacity output wires to earth (max.)
    150 pF
    System characteristics
    Rated ballast-lamp power
    26-42 W
    Rated lamp power on PL-T/C
    26 W
    Rated lamp power on PL-T
    32/42 W
    Rated lamp power on TL5C
    22/40/22+40 W
    System power on PL-T/C
    58.5 W
    System power on PL-T
    69/89.2 W
    System power on TL5C
    52.5/84.1/68.3 W
    Power loss on PL-T/C
    6.5 W
    Power loss on PL-T
    7/7.2 W
    Power loss on TL5C
    6.5/7.1/6.8 W
    Lamp power on TL5C
    46/77/61 W
    Lamp power on PL-T
    62/82 W
    Lamp power on PL-T/C
    50 W
    T-ambient (max.)
    50 °C
    T-ambient (min.)
    -25 °C
    T storage (max.)
    80 °C
    T storage (min.)
    -40 °C
    T case lifetime (max.)
    75 °C
    T-Case maximum (max.)
    75 °C
    T-Ignition (max.)
    50 °C
    T-Ignition (min.)
    -25 °C
    Controls and dimming
    Control interface
    Regulating level power
    Control input protection
    Yes (Basic insulation)
    Mechanical and housing
    L 123x79x33
    Approval and application
    Energy efficiency index
    A1 BAT
    IP classification
    IP 20  [ Ingress Protection 20]
    EMI 9 kHz ... 30 MHz
    EMI 30 MHz ... 1,000 MHz
    EN 55022 Class B
    Safety standard
    IEC 61347-2-3
    Performance standard
    IEC 60929
    Quality standard
    ISO 9000:2000
    Environmental standard
    ISO 14001
    Harmonic current emission standard
    IEC 61000-3-2
    EMC immunity standard
    IEC 61547
    Vibration standard
    IEC68-2-6 F c
    Bumps standard
    IEC 68-2-29 Eb
    Humidity standard
    EN 61347-2-3 clause 11
    Approval marks
    CE marking
    ENEC certificate
    CCC certificate
    Temperature marking
    Emergency standard
    IEC 60598-2-22
    Humming and noise level
    Product data
    Full product code
    Order product name
    HF-Ri TD 2 26-42 PL-T/C E+
    EAN/UPC – product
    Order code
    SAP numerator – quantity per pack
    Numerator – packs per outer box
    SAP material
    Net Weight (Piece)
    0.230 kg
    Installation Diagrams
    Product Data Sheet

    Recently Viewed

    • Add product
    • Add product
    • Add product
    Add product