| Number of light sources | 3
[ 3 pcs] |
| Lamp family code | LED80S
[ LED Module, system flux 8000 lm] |
| Beam angle of light source | 120
°
|
| Light source colour | 840 neutral white
|
| Light source replaceable | No
|
| Number of gear units | 1 unit
|
| Driver/power unit/transformer | PSD
[ Power supply unit with DALI interface] |
| Driver included | Yes
|
| Optic type | WB
[ Wide beam] |
| Optical cover/lens type | No
[ -] |
| Luminaire light beam spread | 100° x 94°
|
| Emergency lighting | No
[ -] |
| Control interface | DALI
|
| Internal wiring | Standard
|
| Feed-through wiring | Feed-through wiring 7-phase
|
| Connection | CU7
[ Connection unit 7-pole] |
| Cable | -
|
| Protection class IEC | Safety class I (I)
|
| Mounting | SMB
[ Ceiling-mounting bracket] |
| Ready-to-install | -
|
| Glow-wire test | 650/5
[ Temperature 650 °C, duration 5 s] |
| Flammability mark | F
[ For mounting on normally flammable surfaces] |
| Accessories included | MB-SW
[ Mounting bracket for suspension wire] |
| CE mark | CE mark
|
| ENEC mark | ENEC mark
|
| Mechanical accessories | No
[ -] |
| Remarks | *- According to the Lighting Europe guidance paper 'Evaluating performance of LED based luminaires – January 2018': statistically there is no relevant difference in lumen maintenance between the B50 and, for example, the B10. Therefore, the median useful life (B50) value also represents the B10 value.
|
| Constant light output | No
|
| Number of products on MCB (16 A type B) | 24
|
| EU RoHS compliant | Yes
|
| Product family code | LL121X
[ CoreLine Trunking] |
| Unified glare rating CEN | Not applicable
|
| Light distribution | DIR
[ Direct lighting] |
| Input Voltage | 220 to 240
V
|
| Input frequency | 50 to 60
Hz
|
| Control signal voltage | 0-16 V DC DALI
|
| Circuit | No
[ -] |
| Circuit option | 7
[ 7 conductors] |
| Initial CLO power consumption | -
W
|
| Average CLO power consumption | -
W
|
| Inrush current | 22
A
|
| Inrush time | 0.275
ms
|
| Power factor (min.) | 0.97
|
| Dimmable | Yes
|
| Housing material | Steel
|
| Reflector material | -
|
| Optic material | Acrylate
|
| Optical cover/lens material | Acrylate
|
| Fixation material | Steel
|
| Optical cover/lens finish | Frosted
|
| Overall length | 1730
mm
|
| Overall width | 95
mm
|
| Overall height | 52
mm
|
| Height | 52
mm
|
| Diameter | -
|
| Colour | White
|
| Dimensions (height x width x depth) | 52 x 95 x 1730 mm (2 x 3.7 x 68.1 in)
|
| Ingress protection code | IP20
[ Finger-protected] |
| Mech. impact protection code | IK02
[ 0.2 J standard] |
| Initial luminous flux | 8000
lm
|
| Luminous flux tolerance | +/-1%
|
| Initial LED luminaire efficacy | 148
lm/W
|
| Init. Corr. Colour Temperature | 4000
K
|
| Init. Colour rendering index | ≥80
|
| Initial chromaticity | (0.38, 0.38) SDCM <3
|
| Initial input power | 54
W
|
| Power consumption tolerance | +/-10%
|
| Control gear failure rate at median useful life 50,000 h | 5
%
|
| Lumen maintenance at median useful life* 50,000 h | L80
|
| Ambient temperature range | -20 to +35 °C
|
| Performance ambient temperature Tq | 25 °C
|
| Maximum dimming level | 1%
|
| Suitable for random switching | No
|
| Full product code | 871869638092500
|
| Order product name | LL121X LED80S/840 1x PSD WB 7 WH
|
| EAN/UPC – product | 8718696380925
|
| Order code | 38092500
|
| Numerator – quantity per pack | 1
|
| Numerator – packs per outer box | 1
|
| SAP material | 910925863971
|
| SAP net weight (piece) | 3.850
kg
|
