6 ProFlood LED Products found

Browse the ProFlood LED واعثر على المنتج الذي تبحث عنه باستخدام خيار المقارنة.

المنتج

Efficacy

Lamp Luminous Flux

Color temperature

IES

Leaflet

Product family information

ProFlood LED is a waterproof projector allowing both image projection and creative light framing – a powerful tool that gives display lighting designers great creative freedom. They can adjust the projector's output to precisely match the surroundings or to create a particular effect, virtually 'sculpting' the light.

Benefits

Exceptionally high-quality output, including advanced control of light distribution and significantly reduced glare

Easy to install and adjust

Features

Projection of text, logos, patterns and other images by means of a gobo

Adjustable shutters enable accurate framing of monochrome or colour beams

Adjustable beam (from 20 ° to 40 °) to precisely match the surroundings and adjust the focus and uniformity

Long lifetime of 50 Khrs L80 at Tq +25 ºC

Anamorphosis: dedicated software makes it possible to calculate the required gobo form to offset the distortion.

Applications

Modern and classical buildings, architectural floodlighting

Downloads

Leaflets

Family - full data sheet Localized commercial leaflet PDF 491.5 kB

Visuals

Family-Photographs-ProFlood-LED
Family-Diagrams-ProFlood-LED
Revit file Proflood_LED.zip ZIP 913.5 kB

Product family details

General

Type	BCP608
Light source	Integral LED-module
Power	55 W (+/-5 %)
Luminous flux	5,590 lm (LED flux)
Correlated Colour Temperature	4,000 K
Colour Rendering Index	>70
Lumen maintenance at median useful life* 50,000 h	min L80
Control gear failure rate at median useful life 50,000 h	5%
Performance Ambient Temperature Tq	+25 ºC
Operating temperature range	-20 to 35 °C
Driver	Built-in (self-ballasted LED-module)
Power/Data supply	Xitanium LED drivers 50 W/s
Mains voltage	220-240 V / 50-60 Hz
Inrush current	20 A
Dimming	No
Control system input	No
Options	Class I and Class II Marine-salt protected (MSP), 500 hrs Other RAL colours available Module Temperature Protection (NTC)
Optic	ZoomSpot Four non-reflecting lenses: beam angle adjustments of 2 x 10º to 2 x 20º (Zoom spot) Image size (Ø): adjustable by moving the lens along the optical axis Image focus: adjustable by moving the two lenses along the optical axis Image uniformity: adjustable by moving the diaphragm (Ø 50 mm) along the optical axis
Optical element	Optical lenses set
Optical cover	Glass clear, with anti-reflection coating
Material	Housing: aluminium casting, ultra-dark grey
Colour	RAL10714 painting
Maintenance	Mains connector access by opening the rear cover by one clip (does not affect the optical settings) No internal cleaning required
Installation	Outdoor: on mast-head frame/wall or Indoor: on roof or ceiling/wall U-shaped mounting bracket with a foot-print suitable for 3-point fixation by means of M14 bolts Max adjustment from the horizontal: -180 to +180º Max vertical aiming: -90 to +90º Operating temperature: -20 Projected area in horizontal position: 0.12 m² Standing-up or hanging-down mounting *Zoomspot system access by opening the front cannon A mains M20 cable gland that accepts cable diameters from 8 mm to 12 mm Mains connection: push-in connector, 3-poles
Cable gland	M 20
Accessories	GOBO support (100 mm), shutter, colour filter
Remarks	When the Proflood is installed to one side above or below the axis, the projected image without gobo correction becomes distorted. To overcome this, a specific 'ANAMORPHOSIS software' has been designed to calculate the required gobo form to offset the distortion. Special request: CRI 80 \|Surge Protection 10 kV\| Dimmability with external box

تواصل معنا

هل لديك اسئلة عن منتجاتنا، أنظمتنا أو خدماتنا؟

تواصل معنا

إكتشف أماكن البيع

نحن نقدر رأيك

عبر عن رأيك بموقعنا

اعثر على أقرب موزع أو شريك

اختر دولتك المفضلة لتحديد موقع أقرب موزع أو شريك لك.

أداة تحديد موقع الموزع أو الشريك